The Chips & Tips Blog

These blog posts provide summaries of each episode and will provide related resources from time to time.
Chips & Tips Podcast Logo

Episode 10 - Can Kanban Ban Me From Ordering Wrong? | Chips and Tips Podcast

When Justin Gray nearly derailed a webinar by running out of endmills, it was a wake-up call. Joined by Ariel Eisen of Arda and Austere Manufacturing, this episode dives into how Kanban systems turn...

Check it out!

Episode 9 - No Prints, No Problem | Chips and Tips Podcast

What happens when a car part hobbyist builds a multimillion-part manufacturing empire without traditional prints? In this episode, Justin from Toolpath visits Jim Belosic at SendCutSend to unpack how...

Check it out!

Episode 8 - To Quote Or Not To Quote? | Chips and Tips Podcast

Three CNC shop owners get real about the biggest thorn in their side: quoting. In this honest, detailed conversation, they explore why quoting is harder than it should be and how they’re working to...

Check it out!

Episode 7 - Product Roadmap and Team Retreat | Chips and Tips Podcast

When Toolpath’s remote team came together in Cleveland, something clicked. From shop-floor brainstorms to late-night bowling, the week wasn’t just productive. It was a clear signal that in-person...

Check it out!

Episode 6 - From Clutches to CAM | Chips and Tips Podcast

Mark Terryberry of Haas Automation joins Toolpath’s Tim Paul for a conversation that goes far beyond the familiar “Tip of the Day” videos. From his journey as a machinist to his mission in mentoring...

Check it out!

Episode 5 - Speeds and Feeds | Chips and Tips Podcast

In this episode of Chips and Tips, the Toolpath Customer Success team dives into one of CNC machining’s most talked-about, but often misunderstood, topics: speeds and feeds.

Check it out!

Episode 4 - Dylan Jackson | Chips and Tips Podcast

In this episode of Chips and Tips, Tim Paul welcomes Dylan Jackson, co-owner of Proteum Machining and host of the Within Tolerance podcast, for an insightful deep dive into what drives a modern...

Check it out!

Episode 3 - Chris Zappettini | Chips and Tips Podcast

In the third episode of the Chips and Tips Podcast, Toolpath’s Tim Paul welcomes Chris Zappettini of Zappettini Consulting for a deep dive into the evolving landscape of CNC machining.

Check it out!

Episode 2 - What's The Chatter About Chatter? | Chips and Tips Podcast

Big news: Toolpath and Chatter are now one team, one mission. In this episode of Chips and Tips, we dive into the "why now" behind this decision, and more importantly, what it unlocks for the future...

Check it out!

Episode 1 - Meet The Team | Chips and Tips Podcast

The debut episode of the Chips and Tips Podcast marks Toolpath’s entrance into the world of industry-driven conversation and insight.

Check it out!